The maintenance method of LED advertising vehicle radiator
Time:2021-01-18
Views:423
As a fourth-generation emerging media, LED advertising vehicles integrate modern high-tech such as environmental protection and energy saving, high-resolution imaging, natural and delicate colors, displayable video and text, and wide viewing angles. LED mobile publicity vehicles have become an important way of advertising. The maintenance method of LED advertising vehicle radiator has become the focus of attention. Let‘s take a look at the following points in the maintenance of the LED advertising vehicle radiator:
1. The LED advertising vehicle radiator should not be in contact with any acid, alkali or other corrosive properties;
2. It is recommended to use soft and hard water after softening treatment to avoid clogging of the radiator and the generation of scale;
3. When using antifreeze, in order to avoid corrosion of the radiator of the LED advertising vehicle, please be sure to use a long-term anti-rust antifreeze that is produced by a regular manufacturer and meets national standards;
4. In the process of installing the radiator of the LED advertising vehicle, please do not damage the radiator (sheet) or bump the radiator to ensure the heat dissipation capacity and sealing;
5. When the radiator of the LED advertising vehicle is completely drained and then filled with water, turn on the drain switch of the engine block first, and then close it when water flows out to avoid blisters;
6. In daily use, check the water level at any time, and add water after stopping the machine to cool down. When adding water, slowly open the water tank cover, and the operator‘s body should be as far away as possible from the water filling port to prevent burns caused by the spray of high-pressure steam oil from the water filling port;
7. In winter, in order to prevent the core from rupturing due to freezing, such as long-term parking or indirect parking, the water tank cover and drain switch should be released to release all the water;
8. The effective environment of the spare radiator should be kept ventilated and dry;
9. Depending on the actual situation, the user should completely clean the core of the radiator within 1-3 months. When cleaning, rinse with clean water along the reverse side of the wind;
10. The water level gauge should be cleaned every 3 months or depending on the actual situation. The parts of the LED advertising vehicle should be removed and cleaned with warm water and non-corrosive detergent.
1. The LED advertising vehicle radiator should not be in contact with any acid, alkali or other corrosive properties;
2. It is recommended to use soft and hard water after softening treatment to avoid clogging of the radiator and the generation of scale;
3. When using antifreeze, in order to avoid corrosion of the radiator of the LED advertising vehicle, please be sure to use a long-term anti-rust antifreeze that is produced by a regular manufacturer and meets national standards;
4. In the process of installing the radiator of the LED advertising vehicle, please do not damage the radiator (sheet) or bump the radiator to ensure the heat dissipation capacity and sealing;
5. When the radiator of the LED advertising vehicle is completely drained and then filled with water, turn on the drain switch of the engine block first, and then close it when water flows out to avoid blisters;
6. In daily use, check the water level at any time, and add water after stopping the machine to cool down. When adding water, slowly open the water tank cover, and the operator‘s body should be as far away as possible from the water filling port to prevent burns caused by the spray of high-pressure steam oil from the water filling port;
7. In winter, in order to prevent the core from rupturing due to freezing, such as long-term parking or indirect parking, the water tank cover and drain switch should be released to release all the water;
8. The effective environment of the spare radiator should be kept ventilated and dry;
9. Depending on the actual situation, the user should completely clean the core of the radiator within 1-3 months. When cleaning, rinse with clean water along the reverse side of the wind;
10. The water level gauge should be cleaned every 3 months or depending on the actual situation. The parts of the LED advertising vehicle should be removed and cleaned with warm water and non-corrosive detergent.
.png)
.png)
Mailme
18672222184