The correct operation of LED screens on advertising vehicle
Time:2019-10-12
Views:1328
Many of the LED display carts have been damaged due to improper operation, resulting in a large amount of money to change screens or repair screens. Proper operation of the LED advertising vehicle display not only saves money, but also extends the life of the LED advertising vehicle.
1. Switching sequence: When opening the screen, first turn on the screen, then turn on the screen; when the screen is off, first turn off the screen, then turn off the screen (first turn off the computer and not turn off the display, it will cause the screen to appear bright spots, burn the lamp, the consequences are serious. )
2. The time interval between the switch screens should be greater than 5 minutes.
3. After the computer enters the engineering control software, it can be powered on.
4. Avoid opening the screen in the full white screen state because the system has the largest inrush current.
5. Avoid opening the screen in an out of control state because the system has the largest inrush current.
The computer does not enter the control software and other programs; the computer is not powered; the control part of the power is not turned on.
6. When the ambient temperature is too high or the heat dissipation conditions are not good, be careful not to open the screen for a long time.
7. When a part of the electronic display body appears very bright, pay attention to closing the screen in time. In this state, it is not suitable to open the screen for a long time.
8. The power switch of the display often trips. Check the screen or replace the power switch.
9. Regularly check the tightness of the hook. If there is looseness, pay attention to timely adjustment, re-reinforce or update the hanger.
10. According to the large screen display screen, control the environment of the part, avoid insect bites, and place anti-rat medicine if necessary.
1. Switching sequence: When opening the screen, first turn on the screen, then turn on the screen; when the screen is off, first turn off the screen, then turn off the screen (first turn off the computer and not turn off the display, it will cause the screen to appear bright spots, burn the lamp, the consequences are serious. )
2. The time interval between the switch screens should be greater than 5 minutes.
3. After the computer enters the engineering control software, it can be powered on.
4. Avoid opening the screen in the full white screen state because the system has the largest inrush current.
5. Avoid opening the screen in an out of control state because the system has the largest inrush current.
The computer does not enter the control software and other programs; the computer is not powered; the control part of the power is not turned on.
6. When the ambient temperature is too high or the heat dissipation conditions are not good, be careful not to open the screen for a long time.
7. When a part of the electronic display body appears very bright, pay attention to closing the screen in time. In this state, it is not suitable to open the screen for a long time.
8. The power switch of the display often trips. Check the screen or replace the power switch.
9. Regularly check the tightness of the hook. If there is looseness, pay attention to timely adjustment, re-reinforce or update the hanger.
10. According to the large screen display screen, control the environment of the part, avoid insect bites, and place anti-rat medicine if necessary.
.png)
.png)
Mailme
18672222184