How to operate LED advertising vehicle correctly?
Time:2021-11-16
Views:346
The LED display of the advertising vehicle was damaged due to improper operation, which resulted in a lot of money spent on changing the screen or repairing the screen. Therefore, the display screen of the LED advertising vehicle should be operated correctly, which not only saves money, but also prolongs the service life of the LED advertising vehicle. Next, the Chengli LED advertising vehicle manufacturer will tell you how to operate correctly:
1. Switching sequence: when turning on the screen, turn on the screen first, then turn on the screen; when turning off the screen, turn off the screen first, then turn off the screen (first turn off the computer without turning off the display screen, it will cause the screen to appear bright spots, burn the lamp, and the consequences will be serious. )
2. The interval between screen switching should be greater than 5 minutes.
3. After the computer enters the engineering control software, the screen can be powered on.
4. Avoid turning on the screen in a completely white screen state, because the impact current of the system is the largest at this time.
5. Avoid turning on the screen in an out of control state, because the inrush current of the system is the largest at this time.
The computer does not enter the control software and other programs? The computer is not powered on? The power of the control part is not turned on.
6. When the ambient temperature is too high or the heat dissipation conditions are not good, you should be careful not to turn on the screen for a long time.
7. When a very bright line appears on a part of the electronic display, attention should be paid to turn off the screen in time, and it is not advisable to turn on the screen for a long time in this state.
8. The power switch of the display screen often trips, check the screen or replace the power switch in time.
9. Regularly check the firmness of the hooks. If there is any looseness, pay attention to timely adjustment, re-reinforce or update the hanging parts.
10. According to the large-screen display screen, control the environmental conditions of the part to avoid insect bites, and place anti-rat poison if necessary.
.png)
.png)
Mailme
18672222184