How to improve the cleanliness of guardrail cleaning vehicle

How to improve the cleaning effect of guardrail cleaning vehicle to a greater extent, Chengli special purpose vehicle company. will give you advice:

1. When cleaning the guardrail, the height of the cleaning brush should be adjusted * * to be consistent with the bottom seat of the guardrail. When cleaning the guardrail, the bottom seat of the guardrail is also cleaned, and the cleanliness of the one-time cleaning operation is higher.

2. Guardrail cleaning car cleaning brush, unique bristle design, no dead corner, no scratch on the paint surface. Cylindrical and double brush head design is adopted, and two brushing and three * * five spraying are completed at the same time (the number of spraying is determined according to the degree of turbidity on the surface of the steel plate). The cleaning brush diameter of this product of Chengli company is designed according to the centrifugal stress generated by the rotating speed of the brush body on the brush wire. Too long brush wire will reduce the centrifugal stress of the brush wire and affect the cleaning effect. The length of the brush body is designed according to the standard steel plate width. During operation, the contact surface between the brush body and the steel plate has a stroke of 25 cm. The excessively long brush body is wasted due to the different degree of local wear. Multi edge flexible brush wire, high-pressure cleaning, no dead angle and no damage to paint surface. Hydraulic protection device, double-sided protection of roller brush, constant distance between roller brush and guardrail plate, stable cleaning quality.

3. In order to achieve better cleanliness of cleaning operation, the product adopts the design method without adding cleaning liquid. Because any kind of cleaning liquid is sticky and slippery, mixed with water and ejected, it will not be vaporized instantly. Therefore, it will reduce the friction between the brush wire and the working surface and reduce the cleaning effect. The cleaning brush wire designed by us is designed and made of polyhedral polyethylene ultra soft material, which will not only not damage the anti-corrosion decorative layer on the steel plate surface, but also effectively remove different pollutants. At the same time, It is more environmentally friendly than adding cleaning liquid.

4. Double roller brush operation, with high cleaning efficiency and fast operation speed, 3-10km / h, achieves better cleaning effect. The designed working speed range is wide, the brush body speed is high and the range is large. The operator can more flexibly grasp the working speed according to the degree of dirt on the working surface, so as to improve the working efficiency.