Chengli 10,000 litres water green sprinkler truck for sale

Greening sprinkler, also known as greening  water sprinkler, garden greening sprinkler, is used for garden seedling protection, urban greening, factory dust removal, fire sprinkler and road washing. The green sprinkler has the function of spraying in different directions.

 1. Power take-off 2, water pump 3, water tank 4, communication valve 5, fire ball valve 6, filter 7, front flush valve 8, water sprinkler valve 9, side spray valve 10, rear sprinkler valve 11, water sprinkler 12 , Tank cover 13, front punch, 14, side spray lotus head 15, rear sprinkler 16, anti-rotation plate ABC, three-way four-position valve.

First, the tank
The structure of the tank body of the sprinkler truck, the tank body is elliptical or square, made of steel plate, the tank body water tank of the whole vehicle is 2-3 rooms, the lower end of the middle partition has a through hole, and the partition in the tank has anti-wave function. In order to reduce the impact of the liquid in the tank when the car is driving. An anti-rotation plate is installed at the water outlet to prevent the vortex from affecting the water pressure when water is sprinkled. The exterior is coated with anti-rust paint and decorative paint.
Can mouth
Tank mouth component: The large cover is fastened to the neck plate of the tank door by bolts, and is connected by a support pin and a small cover of the protective plate. Turn the handle on the small cover clockwise to make the small cover compact. It can be reversed, and it can be opened after the ear plate is disengaged. There is a 30 hole in the big cover, so that the pressure in the tank is basically consistent with the atmospheric pressure during the process of adding water.
Third, power take-off
The special power take-off that matches the gearbox of each model is operated pneumatically or manually. The operation switch is pulled back, the power take-off tooth enters the meshing position, the water pump is driven by the drive shaft, and the switch is returned forward, and the water pump stops working.
Fourth, the water pump
Self-priming impeller pump is a special pump for sprinkler.
Five, ball valve
This sprinkler is equipped with 7 Φ50mm stainless steel ball valves, and 7, 8, 9 and 10 in the picture are used to adjust the sprinkler. One Φ50mm aluminum can ball valve, 4 in the figure to control pumping or sprinkler, which opens when pumping and closes when spraying. One Φ65mm fire ball valve can be connected to the fire belt for emergency fire extinguishing.
Six, water sprayer
There is a duckbill-shaped nozzle or a round-shaped nozzle in front of the sprinkler, and a cylindrical sprinkler is installed in the back, and a lotus head is sprayed on the side. The rear of the car is equipped with anti-aircraft spray guns.
The water sprayer is generally used to flush the street, and plays a role of dust removal and temperature reduction. The water sprayer can be used to adjust the nozzle thread to change the spraying direction and angle of the sprayer. The anti-aircraft spray gun can be used for urban and rural garden greening and emergency fire truck . The shower nozzle can spray the dust from the sprinkler in the middle of the road to clean the air.