3t to 25t Bulk feed transport truck from China Chengli factory

Bulk feed transporters/bulk-fodder transport trucks are mainly used to transport finished feed in bulk or feed production raw feed from feed mills to livestock and poultry farms and feed processing users. At the same time, it can also be used to transport certain non-corrosive powdery granular materials, such as pharmaceutical plant powders and Grain Depot Turnover.

The feed tank of the bulk feed truck is set on the chassis of the truck, and the top of the tank has a feeding port. A spiral conveying and discharging pipe (commonly known as the discharge auger) on the top can be freely rotated and lifted, and the elevation angle of the lift can reach 60 degree. During transportation, the top spiral tube lies on the top of the tank; when it is unloaded, it is lifted so that the outlet at the end of the tube is connected to the feed door on the top of the storage tank in the livestock and poultry farm. The device can also be installed at the end of the tank). When unloading, the screw is driven by the power output shaft and reducer at the bottom of the car to complete the unloading. At present, it mainly launches 3T, 5T, 8T, 11T, 15T and 22T models.

Bulk feed transporters have the following features:

1. Transporting feed in bulk is not only less labor-intensive, but also lower in cost than transporting it in bags. However, livestock farms are required to have feed storage tanks.

2. Bulk feed is sealed and transported in the tank to reduce loss, ensure quality and avoid pollution. Fully automatic loading and unloading, continuous operation, greatly improve production efficiency.

3. Fully automatic hydraulic system, simple operation and easy to use. The chassis adopts truck chassis, other parts, gear pumps, hydraulic motors, etc. are also standardized, and imported hydraulic parts are localized, which provides convenient conditions for maintenance.

4. The tank can be installed with a separate warehouse, which can transport many different types of feed or puffing media at the same time.

Classification of bulk feed trucks:

1 According to the discharging method, it can be divided into: automatic hydraulic discharging bulk feed truck and electric discharging bulk feed truck.

2 According to the type of vehicle, it can be divided into: complete vehicle type bulk feed vehicle and semi-mounted bulk feed vehicle.