.jpg)
The main features of the supper structure :
1) Industry-leading tooling, standardized welding and assembly process, strong consistency of the whole vehicle, full-covered structural parts at the rear, and beautiful appearance.
2) Advanced CAN communication electronic control system, good stability, high-definition screen display, can automatically diagnose and prompt faults.
3) Adopting two-way compression technology, optimized hydraulic system and advanced press-fitting structure design, the press-fitting operation has a large compression force and a large compression ratio. The push plate simulates the garbage filling direction (curved surface) design to ensure that the different components of garbage are evenly pressed. The ground compresses and fills the entire vehicle box without dead corners and gaps or blockages, which greatly increases the net load of garbage.
4) The sliding rail structure of the push plate is a trough track on both sides. Compared with the track placed on the bottom of the carriage, the track has greater rigidity, good stability, no deformation of the bottom plate, smooth movement of the push plate, clean garbage discharge, and reliable work. Etc.
5) The optimized design of the medium-pressure variable-pressure hydraulic system, compared with the high-pressure system with constant pressure of the whole system commonly used in China, has fast dynamic response, small internal heat loss in the system, high work efficiency, short cycle time, simple operation, etc. Advantages, especially reliable work and low failure rate.
6) Standard configuration with 4 heavy hydraulic oil filters (high pressure filter element for oil inlet, oil leakage element for oil return, oil filter element for hydraulic oil tank inlet and outlet), which completely solves the problem of oil valve jamming.
7) The design of the central sewage pipe prevents sewage leakage. The integrated design of the hopper and the sewage tank completely solves the problems of secondary pollution such as running, emitting, dripping, and leaking, thereby absolutely avoiding the garbage truck during compression loading and transportation. The phenomenon of secondary pollution.
8) The movement of the nylon board of the skateboard in the slideway is realized by four sets of imported high-density polymer polyethylene guide support sliders. Compared with the rigid sliding parts such as bearing steel commonly used in China, the sliding resistance and the movement pair are reduced.
9) Skateboard guide rail roller structure, guide plate reverse R design, nylon guide, scraping easily.
10) Set up a garbage backflow prevention device, through the use of shielding baffles to ensure that there is sufficient space in the hopper to achieve efficient operation.
11) When the loader is lifted, the scraper can perform a second cleaning to ensure that there is no residual garbage during the blanking.
12) Equipped with an operating system in the cab, which can complete the lifting of the loader and the process of pushing the plate to unload garbage through the operation of the cab.
13) Equipped with an electronically controlled throttle, which can automatically accelerate and constant speed. The electronic throttle ensures the best coordination between the hydraulic oil pump and the engine speed.
14) There are contact buzzers on the left and right sides of the tail gate and the cab.
.jpg)
.png)
.png)
Mailme
18672222184